If your GarageBand vocals play from only one side, check three things in this order: the pan knob on the track, the input setting of the recording, and the sound balance on your Mac. One of them is almost always the cause. Each takes under a minute to test.
This page walks through the checks, then shows how to keep the voice centered in future sessions.
Why are my GarageBand vocals only on one side?
The usual causes are a pan knob that is turned away from the center, a take recorded from only one channel of your audio interface, or a Mac output balance that favors one speaker. Less often, a stereo effect such as a delay is pushing the sound to one side.
Fix 1: Check the pan knob
- Look at the track header. Each track has a pan knob next to the volume slider.
- If the knob points left or right, turn it back to the center.
- Check for pan automation on the track. If the pan changes during the song, turn the automation off or delete it.
A centered vocal should sound the same in both ears. Test it with headphones.
Fix 2: Check the recording input
A single microphone on an audio interface is mono. If GarageBand records it as a stereo input, the voice may land on only the left or right channel. Open the track settings and look at the input source. Choose a mono input and pick the channel your mic is plugged into. The menu wording varies with your version of GarageBand and your interface, so check your own screen.
If the existing take is already one-sided, record it again with the mono input. A one-sided recording cannot be fixed by the pan knob alone.
Fix 3: Check your Mac sound balance
Open the sound settings on your Mac and look at the output device. Some versions include a balance slider. If it sits off-center, move it back to the middle. Also check the accessibility audio settings, where a mono-audio option and a balance control may appear, depending on your macOS version.
Test with another app, such as a video, to see if the problem follows the Mac and not the GarageBand project.
Fix 4: Check your effects
Switch off the plugins on the track one by one. Stereo delay, chorus and some reverb effects can shift the sound to one side. If the voice returns to the center when you bypass one, adjust its stereo or pan settings.
Can a vocal preset cause one-sided sound?
A preset can include stereo effects, but it should not move a lead vocal to one side. If a preset does, check the effect in its Smart Controls and adjust it. Thir13een's GarageBand vocal presets use GarageBand's built-in effects, and single presets start at 10 USD. The GarageBand Starter Pack is 19 USD and the Vocal Preset Mega Bundle for GarageBand bundles our GarageBand presets in one download. For help with a chain order, see the best vocal chain preset for GarageBand.
How do I keep the vocal centered?
Lead vocals sit in the center of most mixes. Keep the pan knob at center, record from a mono input, and use stereo effects on a separate send, not on the lead track. If you want the layout and order for the rest of the chain, read how to mix vocals in GarageBand and the GarageBand vocals complete guide.
Frequently asked questions
Why is my GarageBand voice only in the left ear?
Most often the track pan is off-center, or the mic was recorded to only the left channel. Check the pan knob first, then the input setting.
How do I make a GarageBand track mono?
Record from a mono input. For a one-sided take already on the timeline, record it again with the mono input.
Why does my GarageBand mix sound fine in the app but one-sided elsewhere?
Check the Mac sound balance and the output device. Test the exported file in another player.
Want to test a centered vocal chain first? Try our free vocal presets for Logic Pro and GarageBand.


