Shop presets

Vocal Presets for Singing: Free and Paid (Logic, GarageBand)

GarageBand vocal presets. Add a 2nd preset for 50% off in the cart.GarageBand vocal presets. GarageBand deal: buy 1 preset, get 1 FREE.

Vocal presets for singing are saved plugin chains: an EQ, a compressor, a de-esser and reverb or delay, set up and loaded in one click. They give a sung vocal a clean, even and finished sound fast, and you adjust them to your voice. You can start with a free preset or a paid one. Both work the same way.

This guide covers what a singing preset should do, how to set one up in Logic Pro X or GarageBand, and where free and paid options fit.

What should a vocal preset for singing do?

A sung vocal is different from a rap vocal. Notes ring out longer, the level moves more between soft and loud lines, and the voice often carries harmonies. A good singing preset handles four jobs:

  • Clean up the low end. A high-pass filter removes rumble and mic-stand noise.
  • Even out the level. A compressor keeps soft lines audible and loud lines under control.
  • Tame harsh "s" sounds. A de-esser smooths sharp sibilance.
  • Add space. Reverb and delay place the voice in the song, so it does not sound dry.

A preset does not fix a poor recording or a poor take. Record close to the mic, at a healthy level, in a quiet room. Then apply the chain.

How do I use a vocal preset on my singing?

Follow this order. The values are starting points. Your voice, your mic and your song will change them, so adjust by ear.

Step 1: Set the recording level

Peaks should sit around -12 to -6 dBFS. Do not record so loud that the loudest note clips. You cannot repair clipping with a preset.

Step 2: Load the preset on the vocal track

Add it to the track you recorded the lead vocal on. In Logic Pro X, this loads the full channel strip. In GarageBand, choose it from the library for the vocal track. If you need help, see how to install Logic Pro vocal presets or how to install and use GarageBand vocal presets.

Step 3: Check the EQ

  • High-pass at about 80 to 100 Hz.
  • If the voice sounds boxy or thick, cut 2 to 3 dB around 250 to 400 Hz.
  • If it sounds dull, add 1 to 2 dB around 8 to 10 kHz with a gentle shelf.

Step 4: Check the compression

For singing, start gentle: a ratio of 2:1 to 4:1, attack 10 to 30 ms, release 50 to 100 ms. Aim for 3 to 6 dB of gain reduction on the loudest notes. If the voice sounds squashed or the breaths get loud, lower the ratio. For more, read vocal compression settings in Logic Pro.

Want the chain already built?

Thir13een presets load this kind of chain for you. The Vocal Preset Starter Pack for Logic Pro X and the Starter Pack for GarageBand each hold three presets for. You can also browse the Logic Pro X vocal presets and the GarageBand vocal presets. Load one, then adjust the EQ and compression with the values above.

Step 5: Set reverb and delay by ear

Use sends, so the dry vocal stays clear. A plate or room reverb of about 1.5 to 2.5 seconds suits most songs. Use a pre-delay of 20 to 40 ms, so the words stay clear before the reverb starts. Add a delay at a 1/8 or 1/4 note with low feedback. Slow, open songs can take more reverb. Fast songs need less. For settings, see reverb and delay for vocals: settings cheat sheet.

Step Tool Starting value What it fixes
EQ Channel EQ High-pass 80 to 100 Hz; cut 2 to 3 dB at 250 to 400 Hz Rumble and boxiness
Compression Compressor 2:1 to 4:1, attack 10 to 30 ms, release 50 to 100 ms, 3 to 6 dB reduction Uneven level
De-ess DeEsser 2 Reduce 3 to 5 dB at 5 to 8 kHz Sharp "s" sounds
Reverb send ChromaVerb Plate or room, 1.5 to 2.5 seconds, pre-delay 20 to 40 ms A dry, flat vocal
Delay send Tape Delay or Echo 1/8 or 1/4 note, low feedback Depth without blur

If the "s" sounds poke out, see de-esser settings in Logic Pro. For the full order of a lead chain, see the Logic Pro vocal chain, step by step.

Are there free vocal presets for singing?

Yes. Our free Logic Pro X preset is Toronto Warmth. It costs $0 and loads a warm vocal chain. Use it as a starting point, then adjust the EQ, compression and reverb for your voice. For a list of free options and what to check before you download, see our free vocal presets guide.

Free presets are a good way to learn what a chain does. A paid pack gives you more choices and different styles to try on the same take.

Which paid vocal presets suit a singer?

Pick by the sound you want, not by a name. For a warm, close pop or acoustic sound, try a style like the Ed Sheeran-Style Vocal Preset for Logic Pro X. For a quick start with variety, use a Starter Pack and test all three presets on one chorus. Keep the one that makes the words clear and the tone natural.

Artist names describe a style only. Thir13een is not affiliated with, endorsed by or connected to any artist named on this site.

What mistakes make a singing preset sound bad?

  • Using the preset with its input too loud, so the compressor works too hard.
  • Leaving the reverb at full level on a quiet, slow song.
  • Skipping the check of the EQ. Every voice differs, so test the cuts and boosts.
  • Stacking a second preset on top of the first. Use one chain per vocal track.
  • Judging on one pair of speakers. Check on earbuds and a phone as well.

For harmonies and backing parts, see vocal harmonies in GarageBand.

Try a preset on your vocal

Download Toronto Warmth, our free preset for Logic Pro X, and load it on your lead vocal. When you want more styles, browse the Logic Pro X vocal presets or the GarageBand vocal presets.

FAQ

Do vocal presets work for singing?

Yes. A preset is a chain of an EQ, compressor, de-esser and effects, and these tools work on any voice. You still need to adjust the settings to match your voice and recording.

Are there free vocal presets for singing in GarageBand?

Our free preset, Toronto Warmth, is for Logic Pro X. For GarageBand, see our free vocal presets guide or build a chain with the values in the table above.

Should I use a preset for singing or build my own chain?

A preset is faster, and it shows you how a finished chain is built. Build your own once you know what each tool does. Many singers load a preset first, then change it.

Why does my voice still sound bad with a preset?

Most often the cause is the recording: a low level, a noisy room or a mic too far away. A preset shapes a good recording. It cannot replace one. Re-record close to the mic, then check the EQ and compression.

Regresar al blog

Deja un comentario

Logic Pro X Vocal Presets