21 Savage-Style Vocals in Logic Pro and GarageBand

GarageBand vocal presets. Add a 2nd preset for 50% off in the cart.GarageBand vocal presets. GarageBand deal: buy 1 preset, get 1 FREE.

Shop the deal

To get a 21 Savage-style vocal in Logic Pro X or GarageBand, record a close, dry, and low-energy lead vocal, then process it with a tight, narrow EQ and heavy compression for a clean yet aggressive sound. Add a subtle, dark delay on phrase ends and layer quiet, doubled ad-libs for a whispery, menacing feel.

This guide gives stock-plugin starting settings for that sound. We use how listeners describe it as reference listening only. We do not know the artist's real plugins, settings or studio chain, so treat every value as a starting point and adjust by ear. To load a finished chain, see our Logic Pro vocal presets or our GarageBand vocal presets.

Thir13een is not affiliated with, endorsed by or connected to 21 Savage. "21 Savage-style" names a sound we aim to approximate, nothing more.

What does a 21 Savage-style vocal sound like?

People who describe this sound often mention a dark, intimate, and low-energy delivery. The vocal is clean, dry, and close-mic'd, with a tight, narrow EQ that feels focused and aggressive without distortion. A subtle, dark delay on the ends of phrases and quiet, doubled ad-libs create a cold, menacing atmosphere.

Most of that comes from the performance and arrangement. Record with a deadpan, low-energy delivery and keep the mic close. The chain adds the surgical EQ and heavy compression, but it cannot add the right attitude.

What are good starting settings for a dark, deadpan, clean vocal?

Use this table on a clean, dry vocal. It uses stock plugins, so it works in Logic Pro X and in GarageBand on Mac. Logic Pro names come first. Change one setting at a time and judge it against the full beat.

Stage Plugin and parameter Starting value Why
EQ Channel EQ, high-pass About 100 to 120 Hz Clears mud and leaves room for the bass
EQ Channel EQ, low-cut Cut 3-6 dB with a narrow Q around 250-350 Hz Reduces boxiness, adds clarity and a "cold" feel
EQ Channel EQ, presence Boost 2 to 4 dB with a medium Q around 2.5 kHz Maintains intelligibility through heavy compression
Compressor Ratio and gain reduction 8:1, 8 to 12 dB of gain reduction Creates the heavily controlled, "slammed" dynamic
Compressor Attack / Release Medium Attack (10-20 ms), Auto Release Allows a slight initial transient for definition
De-esser DeEsser 2 (Logic). In GarageBand, a narrow Channel EQ cut near 5 to 7 kHz Reduce 4 to 6 dB Tames harsh "s" and "t" sounds from the presence boost
Delay Delay Designer or Echo (Logic) / Echo (GarageBand), on a send Eighth note, feedback 15-25%, low-pass filter at 3-5 kHz, mix very low (5-10%) Adds a dark, short repeat on phrase ends for menace
Reverb ChromaVerb (Logic) or Reverb via Smart Controls (GarageBand) ChromaVerb: Plate or Room, 0.5 to 0.8 seconds, send extremely low (3-7%) A tiny amount of space, keeps it dry and intimate

Want this chain pre-built? A preset loads a chain like this in one click, and you tune it to your voice. We do not sell one made for this sound. Browse the Logic Pro vocal presets or the GarageBand vocal presets, or download Toronto Warmth, our free Logic Pro X preset.

For a ready hip-hop starting point, try the Hip-Hop Vocal Preset Bundle for Logic Pro X. It loads a complete, ready-to-use vocal processing chain you can fine-tune to your voice. It is not a copy of any artist's voice.

If your Logic version has no Delay Designer, use the Echo plugin. For a full frequency guide, see the vocal EQ cheat sheet.

How do I add quiet, doubled ad-libs and phrase-end delay?

  1. Record your main lead vocal with a deadpan, close-mic'd delivery. Apply the EQ and heavy compression first.
  2. Record ad-libs ("yeah", "brrr", "on God") on a separate track. Deliver them quieter and more whispery than the lead.
  3. Duplicate the ad-lib track. Pan the original center and the duplicate slightly left or right (5-15%).
  4. Lower the volume of both ad-lib tracks 6-10 dB below the lead vocal.
  5. On a send/aux track, create the dark delay (Echo or Delay Designer with low-pass filter).
  6. Send only the ends of your lead vocal phrases to this delay, automating the send level up for the last word.
  7. Keep the reverb send extremely low on all elements to maintain a dry, intimate feel.

How do I keep the vocal heavy and clear without muddying the beat?

The aggressive low-cut around 250-350 Hz is crucial to prevent the vocal from fighting the mid-range of the 808 or kick. Side-chain the vocal compressor lightly to the kick so the vocal ducks slightly when the bass hits. Check the mix in mono. If the vocal loses its edge, increase the presence boost slightly or reduce the low-cut Q to be less narrow.

How do I do this in GarageBand?

On Mac, select the vocal track, open the Smart Controls, and add Channel EQ and Compressor. Add the Echo plugin from the plug-in list and set it to eighth note with low feedback. GarageBand has no dedicated DeEsser, so use a narrow cut in Channel EQ around 6 kHz. For reverb, use the Smart Controls' reverb knob but keep it very low (5% or less). Record ad-libs on separate tracks and lower their volume. iOS layouts differ, so we list no iOS-only values. For the full workflow, see how to mix vocals in GarageBand.

Stock plugins or a preset: which should I use?

The stock chain above is free and enough for a finished mix. A preset saves time, because the chain is already built and you tune it to your voice. We do not sell a preset made for this sound, and we do not claim any preset reproduces an artist's voice. A preset is a starting chain, nothing more.

If you use GarageBand, browse the GarageBand vocal presets collection. If you use Logic Pro X, browse the Logic Pro vocal presets collection. You can also download Toronto Warmth, our free preset for Logic Pro X. It is built for Logic Pro X, so it only helps if you also use Logic.

More vocal style guides

FAQ

Is there a free 21 Savage-style vocal preset?

We do not sell a preset made for this sound. Our free preset, Toronto Warmth, is for Logic Pro X and is not built for it. The stock chain on this page is free in both apps.

How do I get a 21 Savage-style vocal in GarageBand?

Record a close, dry, deadpan take. Use Channel EQ to cut lows around 250 Hz and boost slightly around 2.5 kHz. Apply heavy compression with an 8:1 ratio. Add a subtle, dark Echo on a send for phrase ends, and keep reverb almost nonexistent.

Is this made by or endorsed by 21 Savage?

No. Thir13een is not affiliated with, endorsed by or connected to 21 Savage.

Regresar al blog

Deja un comentario

Logic Pro X Vocal Presets