Shop presets

Vocal Pitch Correction in Logic Pro with Flex Pitch

Auto-Tune Vocal Preset for Logic Pro X. Add a 2nd preset for 50% off in the cart.Auto-Tune Vocal Preset for Logic Pro X. Logic Pro X deal: buy 2 presets, get 1 FREE.

To correct vocal pitch in Logic Pro, open the Track Editor, turn on Flex, choose Flex Pitch from the Flex Mode menu, then select the notes and raise the Pitch Correction slider. Fix only the notes that sound wrong, and keep the natural movement of the voice. Below are the exact steps, plus the five note controls worth knowing.

Want the chain after the tuning? Our guide to Auto-Tune in Logic Pro covers the real-time route.

How to use Flex Pitch in Logic Pro: the quick version

  1. Select the vocal track and open the Track Editor.
  2. Click the Flex button to turn on Flex View.
  3. Open the Flex Mode menu on the track and choose Flex Pitch. Logic analyses the audio.
  4. Select all notes, then raise the Pitch Correction slider a little at a time.
  5. Fix single notes by hand with Pitch Drift, Fine Pitch, Vibrato, Formant and Gain.

Step 1: Turn on Flex Pitch

Click the vocal region, then open the Track Editor at the bottom of the window. Turn on Flex View with the Flex button. On the track, open the Flex Mode menu and pick Flex Pitch. Logic analyses the recording and shows each sung note as a bar over a piano roll.

You do not need Flex & Follow for this. That feature is for tempo and timing between tracks, not for tuning a single vocal.

Step 2: Use the Pitch Correction slider

Select all the notes in the region. Raise the Pitch Correction slider to move the notes toward the nearest note on the grid. A low setting leaves the voice natural. A high setting sounds robotic and tight. Start low, listen on headphones, and stop as soon as the off notes are fixed.

The slider works on the notes you have selected. To tune only a few words, select just those notes first.

Let a preset finish the sound

Once the pitch is right, the vocal still needs EQ, compression and effects. The Auto-Tune Vocal Preset for Logic Pro X loads a ready-made vocal chain on your track, so you can hear a finished starting point and adjust it. More options sit in the Logic Pro X vocal presets collection.

Step 3: Fix single notes by hand

When one note is still off, click it and use the controls on it:

  • Pitch Drift: flattens the slow wandering of pitch inside a long note. Use it on notes that start right and then slide sharp or flat.
  • Fine Pitch: moves the note up or down by cents, for small corrections.
  • Vibrato: sets how much vibrato the note keeps. Lower it for a straighter tone, raise it for more movement.
  • Formant: changes the tone color of the voice. Small moves help when a big pitch shift sounds unnatural.
  • Gain: sets the level of the single note, so you can lower a harsh word without a compressor.

Drag a note up or down to move it to another pitch. Work one phrase at a time, and compare against the original often by turning Flex View off.

A simple order of work

Tune in passes. First, set Pitch Correction low across the whole region. Second, fix the notes that still sound wrong with Fine Pitch or Pitch Drift. Third, ease Vibrato on long held notes. Last, check the vocal against the beat at low volume. Pitch that sounds fine alone can sound off next to the music, so judge it in the full mix.

Common mistakes

  • Correcting everything to 100 percent. The voice loses its life. Leave small flaws in.
  • Tuning before editing. Remove breaths, clicks and bad takes first, then tune what is left.
  • Ignoring Formant. A large pitch shift with no formant change can sound like a different singer.
  • Tuning a noisy take. The analysis follows the loudest pitch. A clean recording gives cleaner notes.

Prefer to skip the setup? Grab the free vocal preset and hear a finished chain on your own voice first.

FAQ

Does Logic Pro have built-in pitch correction?

Yes. Flex Pitch in the Track Editor is the built-in tool. It edits pitch note by note, and it includes a Pitch Correction slider for fast, automatic fixes.

Is Flex Pitch the same as Auto-Tune?

No. Flex Pitch is Logic's own editor, and you work on the recorded audio. Auto-Tune is a separate plug-in that tunes in real time. Both can give a tight, modern sound.

How much Pitch Correction should I use?

Use as little as fixes the problem. Low settings keep the voice natural. High settings give the hard, robotic tuning heard in some trap and pop vocals.

Do I need Flex & Follow to tune a vocal?

No. Flex & Follow is for timing and tempo matching. For pitch, you only need Flex View and Flex Pitch mode.

Back to blog

Leave a comment

Logic Pro X Vocal Presets